Type 7 / 360° + VARIO

Why Type 7 / 360° + VARIO ?

  • Aesthetically pleasing installation
  • Stable installation

Type 7 H-rail suspension is an elegantly fixed all-aluminum suspension method from which the ducts hang by a keter type bulb edge. The H-rail, so named because it looks like an H in the cross section, is made out of anodized aluminum, making it an excellent choice for corrosive environments. The H-rail is hung using field adjustable anodized aluminum rods that lock into the top channel of the rail. The duct is then suspended from the rail. The duct will have a continuous sewn in rubber gasket, at the 12 o'clock position, that fits into the bottom channel in the H-rail. The height of the gasket above the duct can be manufactured to specification.

Features

Easy installation

FabricAir dispersion systems are intuitive and simple to install. Each duct section is marked with an individual tag, which lets you know exactly where each piece should go. There are no trade...

Read more
Internal 360° Hoops

The Internal 360° Hoops are mounted in sleeves on the inside of the ductwork creating a closed circuit around the circumference. This ensures an aesthetically pleasing duct that is kept open if...

Read more
Curved rails

Curved rails are produced by bending our anodized H-rail. The rails are bent to the exact angle that is needed to suit the elbows in your FabricAir duct system. Curved rails are only available...

Read more
H-rail

 

H-rail is commonly used to suspend complex FabricAir dispersion systems, as there can be bent to suit the elbows. H-rail is produced in 2 meter sections using an extrusion process and...

Read more
Rod drop

 

One or two rows of field adjustable, anodized aluminum rods are hung from the building structure and lock into the top channel of an H-rail type suspension system.

This...

Read more