Type 8 / AIO + 360° + VARIO

Why Type 8 / AIO + 360° + VARIO ?

  • Our most versatile system
  • Excellent for vertical and complicated systems
  • No seismic requirements in most areas
  • Available with All-in-One

Type 8 H-rail suspension is a versatile system, excellent for complex and vertical installations. The H-rail, so named because it looks like an H in the cross section, is made out of anodized aluminum, making it an excellent choice for corrosive environments. The H-rail is supported with intermediate vertical cable drops that lock into the top channel of the rail. The duct is then suspended from the rail. The duct will have sliders at the 12 o'clock position that slide down the bottom channel in the H-rail. The length of the duct straps that hold the sliders can be manufactured to specification.

Type 8 suspension is available with All-In-One.

Features

All-in-One for better looking ducts
All-in-One Support (AiO) consists of semi-circular hangers, made from anodized aluminum, sewn into pockets on the exterior of the duct at fixed intervals. These come pre-installed from the...
Read more
Internal 360° Hoops

The Internal 360° Hoops are mounted in sleeves on the inside of the ductwork creating a closed circuit around the circumference. This ensures an aesthetically pleasing duct that is kept open if...

Read more
Curved rails

Curved rails are produced by bending our anodized H-rail. The rails are bent to the exact angle that is needed to suit the elbows in your FabricAir duct system. Curved rails are only available...

Read more
H-rail

 

H-rail is commonly used to suspend complex FabricAir dispersion systems, as there can be bent to suit the elbows. H-rail is produced in 2 meter sections using an extrusion process and...

Read more