• High heating and cooling capacity
  • No compromise on comfort level switching from heating to cooling
  • Full flexibility when it comes to air volumes, air pressures and temperatures
  • Easy and fast installation
Product Capabilities
The FabricAir® VarioDuct™ provides different flow models for cooling and/or heating purposes. It is tailored with an internal membrane that separates the two airflows.
Depending on which flow pattern location is needed, a damper changes position and moves the internal membrane either up or down covering half of the duct.  
The upper and lower sections can even be designed with their own unique static pressure and air volume to meet the specific requirements and comfort levels of the application.
ΔT may vary from low to high between the two sections. This is customized using differing flow models, thus ensuring a high level of comfort regardless of which section is in use.
Product Features
The FabricAir® VarioDuct™ features an internal membrane to separate the two airflows for heating and/or cooling purposes. This membrane is kept in place by the static pressure, thus does not flutter, providing the perfect airflow for each purpose; heating or cooling.  
Connection between damper and membrane is one zipper away – fast and easy! The membrane solution is available for any length of straight and round duct without bends and elevations.
The damper is operated manually or automatically with a motorized actuator, allowing the membrane to switch positions. The damper can be controlled using a simple room sensor or via the building’s BMS system.

Data sheet

DAMPER* (suspension is not included)
Connector Male fitting, to connecting ventilation system
Operation Manual with a handle or automatic by actuator
Position on damper 3 or 9 o'clock
Voltage 24V or 110V or 230V
Cable length 1m [3 ft 3 in]
Temperature range From -30°C [-22°F] to 50°C [122°F]
Relative humidity range 0-95%, non-condensing
Temperature range From -40°C [-40°F] to 140°C [284°F]
Relative humidity range 0-100%

* The suspension for the damper is not included