FabricAir Fabric Duct System Doubles as a Decorative Feature for a New Restaurant
A newly built restaurant in India installed a fabric duct system from FabricAir to match its vaulted ceiling and warm hospitality with equally considered airflow. The result blends real comfort with a duct that reads as part of the design, not a piece of hidden machinery.
The Challenge
The restaurant was built as a new construction project, with thoughtful interior design and a gabled, wood-paneled ceiling that reaches about 3 meters at its peak. That height is far from a low ceiling but would leave little clearance for a full round duct of the needed capacity. Inside, the pitched roofline gives the dining room a real sense of height and keeps the interior feeling open.
Restaurant dining area
18,000 CMH
D shape
Combi 60
Half Round, Type 9 + 11A
MicroFlow and SonicFlow
Approximately 3 meters
The ceiling’s narrow midsection ruled out a hidden approach: metal ductwork would have needed a drop ceiling, undoing the open, architectural feel the gabled roof creates. Visible instead, metal ducting would have sat awkwardly against the interior’s refined character.
Architecture aside, comfort matters just as much for a restaurant, a place where people gather to celebrate and enjoy themselves. Crowds at opening hours and hot dishes arriving from the kitchen can quickly make the air feel heavy, and in a warm climate, temperatures climb even faster. A steady, gentle airflow across the whole space became essential to protect that comfort.
Alongside these challenges came a single client requirement: a high-contrast fabric duct that would complement the restaurant’s aesthetic while working with the open ceiling.
The Solution
FabricAir delivered a solution finished in a custom pattern that could stand out against the ceiling. FabricAir manufactured the ducts in Combi 60, a permeable, self-extinguishing fabric built for demanding indoor environments and applied a custom print in white on a light grey base.
The ducts also needed to have a slim profile that would adapt to the height restrictions. To meet that requirement, our experts specified two D-shape fabric ducts sized for 18,000 CMH of air distribution across the dining room. Space constraints made the half round profile the practical choice. The profile followed the line of the gabled ceiling instead of interrupting it, giving the space a clean, tapered silhouette.
To keep the whole dining room at a comfortable temperature, the system combines MicroFlow and SonicFlow diffusion. Air releases gently along the full length of each duct, so comfort reaches every table evenly instead of concentrating near the air outlet. An installation height of about 3 meters keeps that distribution effective and consistent throughout the room.
A Half Round Type 9 + 11A suspension system holds the ducts in shape while running close along the sloped ceiling, keeping the silhouette consistent from one end to the other and working with the pitch of the roof rather than against it.
Because installation is fast and straightforward, the fabric duct system added no delays that could affect the restaurant’s opening. The team completed the work on 17 July 2026, while the space was still under construction and before it welcomed its first guests.
Why FabricAir
FabricAir won the project mainly because its system leaves the ceiling exactly as designed. Exposing the gabled roofline keeps intact the sense of height and openness the architecture was built around, while the system itself adapted to the available space without sacrificing genuine climate comfort.
A wide range of colour codes and print options meant the design team could match the ducts to the restaurant’s aesthetic rather than settle for a standard finish. Thanks to its custom pattern, the duct comes across less as construction and more as a design piece that catches guests’ eyes overhead.
Results
This project demonstrates how a fabric duct system can deliver the combination of practicality and aesthetics that architects, engineers and interior designers strive for in their projects.
- Aesthetics: the suspension system keeps the ducts close to the ceiling, and the custom print turns them into a visible design element.
- Adaptability: the D-shape profile and suspension system follow the ceiling’s slanted planes, fitting the available height without interrupting the roofline.
- Comfort: MicroFlow and SonicFlow diffusion, the roughly 3-meter installation height, and the airflow work together to keep the dining room evenly comfortable.
Hospitality venues juggling airflow, aesthetics and busy dining areas face similar trade-offs, and Restaurants / Cafeterias / Banquet halls | FabricAirshow what fabric ducting can achieve in comparable spaces: comfort and considered design, delivered together