Case study — 10

Three systems were installed to distribute air-conditioned air evenly in the airport hall without creating excessive draughts. ‘D’ section ducts were used because the ducts had to be fixed directly to the underside of beams and suspended on an H-profile framework.

The result is an aesthetic, energy friendly solution with high levels of occupant comfort. The flexible duct design makes it easy to change the store layout and exhibition items as needed.

The fabric air ducts play into the overall context above the grid and even acts as an absorbent of sounds resonating in the space. The low pressure drop means significant energy savings.

“During all project stages, FabricAir staff have worked very efficiently, provided professional advice, and proved that our management made the right choice when they decided to use FabricAir air dispersion systems,” says plant manager Mr. Ramazan Evir.

In the past, the large workshop hall, which covers more than 21,528 square feet, often had an uncomfortable indoor climate. Mr. Harald Geissler, who handled the planning and construction management of the project, wanted to allow air to enter the area around the workstations with as few drafts as possible.

“Fabric ducts were chosen for this project because they are the most suitable in a corrosive environment and will not be affected like metal ducts would have. The architect was happy with the fabric ducts from an aesthetic perspective; the attractive look of the ducts makes them a part of the architecture and acts as great decorative element. But most important was that it is suitable in a corrosive environment.” Michael Becker, Air Conditioning Systems.