The BorealisWind Ice Protection System by FabricAir will be at the center of the field tests in OPTIMICE, a new Horizon Europe project, funded by the European Union to optimise wind power reliability, operation, and maintenance in cold climates.

FabricAir is one of 14 partners in OPTIMICE, a new research and innovation project funded by the European Union under Horizon Europe. Over 42 months, the consortium will take ice protection to the next level, combining forecasts, sensor data, and physics-informed AI to optimise when and how ice protection systems operate. For our BorealisWind team, this means bringing our proven hot-air ice protection technology to turbines in Sweden where it will be the main test platform for the project collaborating together with leading research institutes, a turbine manufacturer and a wind farm operator.

Wind turbine in a blue sky background

 

“We are excited to be providing the ice protection system for the OPTIMICE project and to be working with these world-class partners for the next three and a half years. The flexible nature of our product, in both hardware and controls, is perfectly suited for this type of study so we are quite eager to see just how far these systems can be optimised.”

Dylan Baxter, P.Eng., Director of Technology, FabricAir

 

Icing remains one of the main obstacles for wind energy in cold climates. Around one in four onshore wind turbines worldwide operates in cold-climate regions, and ice on the blades leads to energy losses, downtime and financial risk. Ice protection systems (IPS) are a proven way to reduce these losses and safety risks, and many turbine manufacturers now offer them. The next step is to operate them more intelligently, to decide when and how to heat based on forecasts, live sensor data, and integrating IPS fully into everyday operation and maintenance (O&M) practices.

OPTIMICE, short for Optimising Wind Power through Intelligent Control and Monitoring in Cold Environments, sets out to take that step. To do so, the consortium combines controlled icing wind tunnel experiments with field validation at wind farms in Sweden and Canada. Its work covers four areas:

  • Reliability: validated IPS performance envelopes and predictive IPS triggering under icing conditions.
  • Condition monitoring: integrated sensing, fault detection and digital diagnostics for blades and ice protection systems.
  • Smarter O&M: less inspection effort, better maintenance scheduling and data-driven decision support.
  • Digital tools: physics-informed AI for icing detection, power prediction and IPS control, including prototype decision-support dashboards.

Field trials with BorealisWind in Sweden

During the first nine months, our BorealisWind team will design, install and commission two retrofit hot-air ice protection systems at the Dragaliden wind farm in Sweden. We will then connect both systems to icing sensors and turbine data through an on-site remote server, giving the consortium a level of experimental control that the original site configuration does not offer.

This setup gives the partners safe and controlled access to IPS start and stop triggers, power modulation, and heating logic. In this way, they can test new control strategies in real operation and compare them with reference turbines on the same site. Later on, FabricAir will implement the triggering strategies that partners develop, from forecast-based and AI-based to physics-based and sensor-based approaches, and run them on the test turbines. Curated results will be shared with industry, IEA Wind Task 54 and standardisation bodies, building public understanding of how IPS can reduce icing risk and increase net energy production.

A consortium spanning the cold-climate value chain

OPTIMICE brings together some of the key organisations of IEA Wind TCP Task 54 (Cold Climate Wind). London and South East University Group (UK) coordinates the work. Alongside FabricAir, the partners include universities and research institutes, a wind turbine manufacturer, sensor specialists, a wind farm operator and forecasting experts from Europe, Canada and South Korea.

The partners are Nergica, Danmarks Tekniske Universitet (DTU), Université Laval, VTT Technical Research Centre of Finland, Vestas Wind Systems, AIT Austrian Institute of Technology, Instrumentation Icetek, Dragaliden Vind, Meteotest, Gwangju Institute of Science and Technology (GIST), FORCE Technology and Pileus Scandinavia.

Project facts

  • Project: OPTIMICE (Optimising Wind Power through Intelligent Control and Monitoring in Cold Environments)
  • Project number: 101325951
  • Programme: Horizon Europe, Research and Innovation Action (call HORIZON-CL5-2026-02, topic HORIZON-CL5-2026-02-D3-07)
  • Granting authority: European Climate, Infrastructure and Environment Executive Agency (CINEA)
  • Duration: 1 January 2027 to 30 June 2030
  • Maximum EU Contribution: €5.19 million
  • Coordinator: London and South East University Group (UK)
Funded by the European Union

Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Climate, Infrastructure and Environment Executive Agency (CINEA). Neither the European Union nor the granting authority can be held responsible for them.

Receive valuable content first

Enter your email and be among the first to get tips and articles from our experts about HVAC industry topics.